KBS consultants engineer Jobs engineering design draughtsman mechanical structural civil chemical electrical electronics oil and gas petrochemical

Engineer Testing - Baroda

Our clients, a world's leading manufacturer of planes and trains have the following requirement for Baroda, Gujarat

Engineer Testing (Engg. Dept)

Graduate in Electrical /Electronics Engineering
4-5 years of experience in defining the Testing of electrical, electro-mechanical, electronic systems and exposure on PC-based testing & test automation.
Previous experience in traction / rail application preferable
Knowledge & understanding of international test standards applicable to rail domain preferable

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join. Top

Facilities Manager – Chennai

Our client identified as an Industry Leader in Design, Marketing & Sales of Power related products and related Services / Solutions in Electro-Mechanical Engineering field. Striving to develop better design, produce and deliver value-added engineering products & services with Speed & Quality. They are looking for the following openings in chennai:

Facilities Manager:

Degree: B.E (EEE)
Experience: 2-3yrs
Excellent communication Skills
Good knowledge about Electrical
Weakly off
Conveyance allowance will be provided
Only General Shift
Good Written Skills in English is must.
Package up to 30k pm

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join. Top

Software Development Engineer - VC++ / VB with FPGA - Chennai

Our client, a design and manufacturing Services company focused around the area of Printed Circuit Boards solutions. Their services include Printed Circuit Board Engineering, Design, Manufacturing & assembly service. They have the following requirement for their Chennai Office.

Job Description:

3+ yrs of Experience with VC++ / VB / VBScript
Ability to understand Device Drivers and byte level code alignment
Exposure to NET and C# programming with WMI experience for low level device operation.
Development experience with ActiveX controls and XML schemas
Knowledge of basic parsers / compiler writings / lex & yacc is certainly a plus.
Understanding of FPGA or similar Firmware / logic gates interface is strongly desired.
Experience with communication protocols stack and network stack would be a plus.
Basic understanding and experience with ASP and web technologies.

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

Service & Maintenance Engineer - Baroda, Chennai, and Kolkata

Our Client is a system house of Siemens with head office in Gwalior & branch office in Pune. They are into Automation & IT Integration Business to any kind of Manufacturing Processes.

Qualification: BE or B.Tech (Electricals / Electronics / Instrumentation)

Experience : 1-1.5 Yrs

Candidates preferred from Siemens . Allen Bradley, Schneidre System houses

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

General Manager – Chennai

Requirement : Engineering Graduate with knowledge of BMS system,Home Automation Systems and Contracting in General.

The primary objective of this role is to maintain entire company activities related to projects and carry out the function of marketing and order execution to specification, on time and at lowest cost to the company.

Duties include:

Sell, Design projects, and provide submittals along with resident managers for all Building Management , Home Automation and PLC controls job including special jobs.
Responsible for Profit and Loss account for BACP business within India
Marketing of products to internal and external customers
Develop Distributor Support Network
Price control within India
Coordinate with Head Office Dubai on new products and pricing
Develop OEM agreements for non available products
Work closely with consultant and contractors/Architects
Insert specifications
Technical and sales training for entire region
Policy and procedures for India to promote the BAP controls business
Timely order the control items on factory
Make sure of Delivery and execution of all the projects.
Commission the system utilizing project support staff
Operate to the agreed professional and efficient standards for cost checking, buying, contact cost management, variations and applications for payment.
Supervise all elements of each project to ensure it is completed on time and within budget.
Provide technical estimating support for sales.
Implementing agreed engineering policy for the company’s
Negotiation of disputes (always involving the relevant Sales Engineer/Manager).
Effective liaison with all other staff in Dubai and India.
Ensuring customer satisfaction throughout the warranty phase and beyond.
Reporting on orders processed and in progress.
Reporting weekly performance to Managing Director
Achieve target of BAP chnennai
Lead Project /sales team / engineers within India
Handling of support team in UAE
Contracts management
Day to Day function of a General Manager from Accounts to Admin.

Please send us your updated resume to apply@kbsconsultants.comTop

BMS Engineer - Chennai / Dubai

Required Skills / Experience:

BE/Diploma with 3 years experience in similar field
Experience in Building Management Systems ( Johnson Controls/Siemens/Honeywell/ or similar preferred.)
Basic knowledge of HVAC system and Electrical works Mandatory. Software knowledge with Front end graphics design will be an added advantage.
BE/Diploma with 3 years experience in similar field

Please send us your updated resume to apply@kbsconsultants.comTop

BMS Sales & Estimation Engineer - Chennai / Dubai

Required Skills / Experience:

BE/Diploma with 3 years experience in similar field
Experience in Building Management Systems ( Johnson Controls/Siemens/Honeywell/ or similar preferred.
Basic knowledge of HVAC system and Electrical works Mandatory.
Software knowledge with Front end graphics design will be an added advantage.
Exposure to turnkey proposal for BMS/Security /ACCESS control will be an added advantage
Ability to read the design drawings & tenders
Interaction with contractors and consultants
Experience in Construction & Service /Maintenance industry

Please send us your updated resume to apply@kbsconsultants.comTop

BMS Technician - Chennai / Dubai

Required Skills / Experience:

Diploma/ITI with 3 years experience in similar field
Experience in HVAC field devices and electrical/instrumentation works & Basic knowledge of network cabling is mandatory.
Able to read the Autocad drawings and loop checking experience required.

Please send us your updated resume to apply@kbsconsultants.comTop

HVAC/ AC Sales Engineer - Chennai / Qatar / Dubai

Required Skills / Experience:

BE/Diploma with 3 years experience in similar field
Basic knowledge of HVAC, chillers,FCU,AHU estimation and design
Ability to read the design drawings & tenders
Interaction with contractors and consultants
Heat Load Calculations
Experience in Construction & Service /Maintenance industry
Work experience with A/C contracting companies in Gulf preferred but not mandatory

Please send us your updated resume to apply@kbsconsultants.comTop

Sales & Estimation Engineer (MEP) - Chennai / Qatar / Dubai

Key scope :

Attends sales enquiries and/or technical support to customers
Develop new markets/customers
Prepare quotations, sales proposals and reports.
Monitor competitors’ movement and provide marketing information and intelligence
Manage, monitor and follow up on pursue/target project
Engineering in Electronics/Electrical or Mechanical Engineering
5-8 years experience in electro-mechanical industry
Aggressive, resourceful and able to work independently

Please send us your updated resume to apply@kbsconsultants.comTop

Sales Manager (Industrial Automation & Controls)EPC Division - Chennai / Qatar / Dubai

Nature And Scope:

The primary objective of this role is to maintain entire Automation business activities related to projects and carry out the function of marketing and order execution to specification, on time and at lowest cost to the company.

Duties include:

Sell, Design projects, and provide submittals along with engineers for all PLC /DCScontrols job including special jobs.
Estimation of PLC/DCS related jobs
Ability to read and quote for complete tenders
Marketing of products to internal and external customers
Develop Distributor Support Network
Coordinate with Head Office on new products and pricing
Develop OEM agreements for non available products
Work closely with consultant and contractors
Insert specifications
Timely order the control items on factory
Make sure of Delivery and execution of all the projects.
Commission the system utilizing project support staff
Operate to the agreed professional and efficient standards for cost checking, buying, contact cost management, variations and applications for payment.
Supervise all elements of each project to ensure it is completed on time and within budget.
Provide technical estimating support for sales.
Effective liaison with all other staff in Dubai and India.
Ensuring customer satisfaction throughout the warranty phase and beyond.
Reporting on orders processed and in progress.
Reporting weekly performance to Managing Director
Lead Project /sales team / engineers within ME

Please send us your updated resume to apply@kbsconsultants.comTop

Project Engineers ( Industrial Automation & Controls)- EPC Division - Chennai / Qatar / Dubai

Nature and Scope:
The primary objective of this role is to maintain day-to-day activities related to controls/PLC/DCS and Electrical Projects.

Duties include:

Design, and provide submittals for all controls jobs that involve PLC and Electrical Panels.
Complete the job from Booking up to handover
Commissioning of Siemens /Allen Brabdley/GE/OMRON PLC’s
Software and ladder logic development
Field commissioning of all the aspects of PLC and DCS related jon
Turnkey responsibility of system integration

Please send us your updated resume to apply@kbsconsultants.comTop

A/C Technicians - Chennai / Qatar / Dubai

Required Skills / Experience:

Diploma/ITI with 3 years experience in similar field
Basic knowledge of HVAC, chillers,FCU,AHU.
Commissioning & Installation of the FCU ,Chillers and AHU
Hands on experience in installation/Ducting and commissioning

Please send us your updated resume to apply@kbsconsultants.comTop

Electricians - Chennai / Qatar / Dubai

Required Skills / Experience:

Diploma/ITI with 3 years experience in similar field
Conduting , cabling of industrial / Construction
Termination of HV/LV
Loop Checking
Hands on experience in all the aspects of construction and industrial electrical installation works

Please send us your updated resume to apply@kbsconsultants.comTop

MEP Site Erection Engineer - Chennai / Qatar / Dubai

Required Skills / Experience:

Installation & maintenance of Water, Air - cooled chillers & Heat exchangers.
Installation & maintenance of Air side equipments (FCU, AHU, ERU, FAHU).
Scheduled maintenance for all kind of pumps.
Ventilation system maintenance with CO sensors.
Fire fighting system maintenance.
Chilled water piping system design.
Pumps head calculations.
Thermal load design, Ducting design, Ventilation design.
Static pressure calculations.
As-built drawing preparation.

Please send us your updated resume to apply@kbsconsultants.comTop

Switchgear Sales Engineer - Chennai

Requirements:

Electrical Engineer with 3 – 5 years experience in Switchgear Sales
Sales and Service experience of LV panels , MCC and all electrical panels Knowledge of BMS ,DDC and PLC control Panel
Basic Knowledge of HVAC controls
Valid Driving License
Proven Sales record in the switchgear manufacturing industry

Please send us your updated resume to apply@kbsconsultants.comTop

Switchgear Panel Technicians - Chennai
Required skills / Experience:

ITI electrician with 3 – 5 years experience in Switchgear assembling / manufacturing industry
Wiring, assembling experience of LV panels , MCC and all electrical panels
Knowledge of BMS ,DDC and PLC control Panel
Basic Knowledge of HVAC controls
Basic work experience in switchgear manufacturing industry

Please send us your updated resume to apply@kbsconsultants.comTop

Civil Design Engineer - Visakhapatnam

Our client is a recently set up subsidiary of a leading European Company which has its presence all over the world in the area of cooling water systems. It has recently forayed into India by setting up its head office and manufacturing facilities at Visakhapatnam. They have the following opening in Visakhapatnam:

Year of Experience : 3-5 Years

Nature of Job : Design Engineer (civil )

Field of Experience :

Designing and Quantity estimation of industrial structures, cooling towers, power plant structures, pipe supports, PEB structures ( Both in RCCC & Steel )

Software : Autocad, stadd pro, Tekla

Codes and standards : IS 456, SP 16, Is 13920, IS3370, IS800, IS811, IS875 (part 1-3), IS1893 and European code

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

Civil Site Engineer - Visakhapatnam

Our client is a recently set up subsidiary of a leading European Company which has its presence all over the world in the area of cooling water systems. It has recently forayed into India by setting up its head office and manufacturing facilities at Visakhapatnam. They have the following opening in Visakhapatnam:

Year of Experience : 3-5 Years

Nature of Job : Site Engineer (civil )

Field of Experience :

Execution of industrial structures, cooling towers, power plant structures, pipe supports, cable Racks, PEB structures ( Both in RCCC & Steel )
Measuring, recording of work in measurement book and preparation of bill for Quantity of work.
Estimation of Quantity from drawings
Site surveying and soil investigation.

Codes and standards : IS 456, SP 16, Is 13920, IS3370, IS800, IS811, IS875 (part 1-3), IS1893 and Delhi Rates of schedule

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

ITI Electricians & Electronics Technicians - ITI certification - Dubai

ITI Electricians / Diploma- ITI certificate Holders -Dubai

Qualification : ITI –Electrician

Experience :

2-3 Years in Industrial Wiring / Cabling with Panel Wiring.
Should have knowledge to study and understand the Electrical Drawing with symbols.

Salary :

AED1500-2000/Month
One Month Leave per year with Salary
Air Ticket after completion of 2 Years
Other benefits as per UAE Labour Law

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

ITI Electronics Technicians - ITI certification - Dubai

ITI Electricians / Diploma- ITI certificate Holders -Dubai

Qualification : ITI- Electronics Technician

Experience :

2-3 Years Experience in Repairing of PCB with component level
Should have knowledge in Study and Understand the Drawings with symbols.
Should have knowledge in Understand different components with their characteristics.
Should have knowledge in SMD components soldering/ de-soldering capabilities using soldering stations.

Salary :

AED1500-2000/Month
One Month Leave per year with Salary
Air Ticket after completion of 2 Years
Other benefits as per UAE Labour Law

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

Area Executive - Executive / TL- Service - Hyderabad

Our Client is a Joint Venture Company incorporated as a Limited Company under the Company’s Act 1956 in Registrar of Companies, Chennai. Branches all over South India namely at Chennai, Bangalore, Coimbatore, Hyderabad & Trichy and Service Centers at Vijayawada, Guntur, Madurai, Trivandrum, Cochin. The product range of Company includes all types of lifts for Residential / Housing, Industrial Sectors & Dumb-waiters. The Company has its Manufacturing facility , with all the required equipments and testing instruments to ensure effective in house quality control. Each and every activity of the Company like Design, Manufacturing, Installation and Maintenance of Elevators passes through unmatched quality and Safety standards of World No.1. They have the Area Executive requirement in Bangalore , Hyderabad.

Job Title: Executive / TL- Service

Department: Service

Report To: Manager / Area Executive (Functional placement in the organization)

Key Responsibilities:

Maintain Zero lost time and fatality.
Benchmarking in call back response time, CPUA, Audit Rating.
Effective management of the entire team as well as relationship management with subcontractors and employees.
Working closely with the builders and associations in area.
Subcontractor development and ensure they follow the Company rules related to Safety and Quality Monitor and review performance of the employee on a continuous basis.
Organize weekly meetings relating service Performance
Monitor the productivity of each team on a periodical basis and initiate necessary action wherever required.
Ensure prompt responses to actively resolve customer complaints there by improve customer satisfaction.

Job Description:

Implementation and follow of EHS Processes
Maintain Zero lost time and fatality.
Ensure EH&S rules and procedures are adhered to by all employees
Area Safety meeting
Tool Box Talks and Attendance Sheets
PPE issue/receipts
Investigate all accidents along with department representatives
Fatality preventive Audit (FPA) to be carried out of 8 Nos. in a month
Responsible for meeting the safety standard.
All elevators are Compliance of WWJSS Requirement.
Implementation and follow of Service Processes
Responsible for preventive maintenance carried out as per the plan and Reduction of the callouts (CPUA)
Conduct Reporting of Sub Ordinates in the morning
Surprise visits to sites where s are working
OJT to to upgrade their technical knowledge.
NIS Inspection
Annual Equipment Survey of all service units and pink copy returns
Maintain Highest Audit rating of OFAR and SUSA in Area.
100% Audit copy returns
To reduce shut down time byo
Chalking out clear repair plan
Organizing adequate stock of spares
Reduce the PUN Units byo
Performing call backs analysis on a weekly basis for Elevators in Servicing
Chalking out action plans
Provide Support for timely AMC, Conversion Renewal of existing units.
Provide support and Health check up for Recovery and acquisition of Elevators.
Prevent Losses of Existing Elevators.
Generation of ‘T’ orders and completion of ‘T’ order within one month max.
Co-ordination with H.O for spares for Branch / Area material requirements.
Coordination with factory for material to solve the field complaints
Implement effective cost control measures
Handling of any other special assignment discussed and given time to time

Authorities:

Approval of Time Tickets.
Approval of Leaves
Deducting of time of Examiners and Contractors for non production or quality work.
Approval of City Expenses Report.
Approval of Material Request from.

Requisites:

Good Leadership, Communication and Interpersonal skills.
Belief in ethical culture and integrity
Ability to handle Builders / Architects / Associations
Person should have passion for sales, business development and target oriented

Qualification / Experience:

Diploma in Engg. Any discipline – Minimum 7-10 years in Service.
Testing and commissioning
Preferably from Elevator Industry.

Age: 22 TO 35 Years
CTC Rs. 3 Lacs

Please send us your updated resume to apply@kbsconsultants.com with expected and current CTC, required time to join.Top

Automation Engineers - Dubai

Our client, based in Dubai are the leading system Integrators and doing turnkey Projects. They have the following requirement Automation Engineers

Qualification :

Diploma / Degree in Electrical & Electronics Engineering

Experience :

2-5 Years in Industrial Automation with Siemens PLC
Should have Good Knowledge in
a) Programming PLC’s , HMI/SCADA and Communications with Third party instruments
b) Panel Wiring and Field wiring
c) Handle the Projects Independently
d) Design with AutoCAD for Electrical Control and Power Panels
Salary :

AED 4000-6000/Month
One Month Leave per year with Salary
Air Ticket after completion of 2 Years
Other benefits as per UAE Labour Law
Please send us your latest updated resume with current, expected salary details and required time to join to apply@kbsconsultants.comTop

Civil Engineer
Male Candidate
Min 4 – 6 yrs experience in handling individual packages of a project at site.
Must report to the GM and perform the works assigned to him.
Please send us your latest updated profile with current and expected salary details to apply@kbsconsultants.comTop

GM (Electrical & Ins.)

Our clients are a diversified Group having interest in Steel Manufacturing , Thermal Power, Mining and Jewellery businesses. They are now expanding their Thermal Power plant for their captive consumption and distribution. They require

GM (Electrical & Ins.)

15 yrs experience in power evacuation system (220kV or 400kV substation, transmission line).
Electrical engineer is preferred. Must be independent and also should be capable of handling government people.
Thorough knowledge of codes, standards and procedures to be followed at site and also during erection.
Should have handled atleast a transmission/ substation project of a magnitude of not less than 220kV including liaisoning with govt. bodied at site.
Fluency expected in Hindi, Kannada and English.
Thorough knowledge of transmission line laying, substation, substation automation is expected.
Preferably should have worked with any of govt. Electrical supply and transmission company.
Should also have the experience of plant power distribution and evacuation system.
Knowledge of instrumentation is an added advantage.
Please send us your latest updated profile with current and expected salary details to apply@kbsconsultants.comTop

Associate General Manager - Chennai

One of our reputed client in the construction industries has the following requirement for Chennai

Required Skills / Experience:

Sr.Project Engineer - Chennai

One of our reputed client in the construction industries has the following requirement for Chennai

Required Skills / Experience:

Site supervisor - Chennai

One of our reputed client in the construction industries has the following requirement for Chennai

Required Skills / Experience:

Technical Lead – Ansoft - Bangalore

Our client, a sole distributor for ANSOFT, (the industry standard software that combines electromagnetic with circuits which in turn helps to design complex systems for both HF and LF applications) for SAARC countries is looking for high caliber resources to cater to the research and academic requirements of academic giants like IISc, IITs, NIITs, and others. They have the following requirement:

Technical Lead - Ansoft

Required Skills / Experience:

Technical –Lead (Civil FEM) - Bangalore

Our client, a sole distributor for Civil FEM, the most comprehensive software for civil engineering, for SAARC countries is looking for high caliber resources to cater to the needs of its industrial and academic segment of civil FEM users. Civil FEM encompasses large part of civil engineering namely: Nuclear power plant structures, tunnels, foundations, dams, bridges, wind/hydraulic power plants and many more hence the challenge also is to reach the software, to the legitimate user base and increase the existing customer base by many a fold. They have the following requirement:

Technical -Lead (Civil FEM)

Required Skills / Experience:

Mill Manager - USA

Leading Pulp & Paper manufacturer seeking experienced mill manager for operations requires strong leadership skills, at mill manager level in Pulp and Paper operations.

Responsibilities:

Production Manager - USA

Our client is a group has been formed to consolidate their diverse business interests in the United States and abroad in information technology, communications, infrastructure development (including power plants, refineries, and petroleum exploration activities), business services and commercial state and condominium complex acquisition and operation. In addition to their on-going involvement in project management activities, it maintains an aggressive and continuing interest in considering personal investment in high potential business activities.They need the following requirement in U.S.A

Production Manager - USA

Required Skills & Experience:

Process Engineer - USA

Our client is a group has been formed to consolidate their diverse business interests in the United States and abroad in information technology, communications, infrastructure development (including power plants, refineries, and petroleum exploration activities), business services and commercial state and condominium complex acquisition and operation. In addition to their on-going involvement in project management activities, it maintains an aggressive and continuing interest in considering personal investment in high potential business activities.They need the following requirement in U.S.A

Process Engineer:- USA

Required Skills & Experience:

Manufacturing Engineering Manager

Reporting Relationships:

Position Reports to: Director of Operations

Subordinate Staff: Manufacturing Engineers

Knowledge/Education & Experience:

Engineer - Civil

Description

Essential Job Functions:

The essential duties and responsibilities regularly assigned to this position include:

Experience: 1-3 years
Industry Type: IT
Functional Area: IT- Embedded
Location: Chennai
Remuneration Details: As per industry standards
Education: B.E/ B.Tech Electronics/ Telecommunication, Computer Science

Desired Profile:

Must have relevant exp in embedded SW testing on operating systems / rtos. Complete knowledge in test processes, test planning, test case generation, embedded testing. Very good understanding of embedded systems development and debugging.

Preferred Profile :

1.BE / BTech / ME / MTech/MS in Electronics/Electrical/Computer science
2.1-3 years of experience specifically in QA/Testing
3.Location - Chennai, India 4.Willingness to join a start-up company

Our client, a market leaders in POSITIVE DISPLACEMENT PUMPS in India and have over three decades of strong presence in the market backed by Regional Offices in all Indian Metros & and have own Warehouse cum Marketing offices in Australia & U.K .

Territory Executive - HYDERABAD

Our client, a market leaders in POSITIVE DISPLACEMENT PUMPS in India and have over three decades of strong presence in the market backed by Regional Offices in all Indian Metros & and have own Warehouse cum Marketing offices in Australia & U.K .

Pipeline Designer - Oman
Reports to Pipeline Lead

Experience and Qualifications required
Minimum 10 years experience in the oil and gas industry with experience on major capital projects Minimum of 5 years experience with 3D drawing systems (e.g. PDMS).

Position description – Purpose
Developing Pipeline design drawings and documents and provide expertise in drawing systems.
Position description – (Roles &) Accountabilities
Works closely with discipline project engineers/designers and other discipline engineers in the delivery of project engineering/construction deliverables, quality control drawings and overall project support.
Develop designs in PDMS and (new) drawings in electronic format (AutoCad).
Implement hand marked-up changes to drawings.
Maintain standard drawing templates.
Provides quality assurance reviews and detailed checking support.
Maintain and monitor drawing development progress.
Meet project commitments and deliver to schedule.
Identify & implement process improvement to reduce cycle time & cost.

Key Competencies required
Technical knowledge of advanced 3D design applications and processes.
Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)
Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines.
Knowledgeable with designing industry related piping deliverables (skids, equipment general
arrangements, isometrics, vessel sketches, pipe supports, Weight & CG’s, etc)
Is proficient in the use of human factors engineering guidelines and HSE best practices
Ability to work effectively in a team environment or independently with little guidance or supervision is
required.
Knowledgeable of the interface points between design disciplines.
Is able to use Microsoft Word, Excel, Access, and PowerPoint.
Strong interpersonal and communications skills are highly desirable.

Maintenance Engineers Asst Managers Maintenance

Qualification: Graduate Diploma engineers
Experience:Having hands on 3 to 7 years of experience on Hydraulic operated machines.
Candidate should be capable to handle maintenance problems independently.
Salary negotiable and not constraint for right candidates. Mail Us your updated profile with contact nos. Present and expected salary details and joining time required to apply@kbsconsultants.com

Quality assurance Engineers Asst Manager

Qualification: Graduate Diploma engineers
Experience:Having hands on 3 to 7 years of experience quality assurance and implementations of systems.
Candidate should be exposed to SQC and TQM technics.
Candidates from auto ancillary industry are preferable.
Salary negotiable and not constraint for right candidates.Mail us your latest updated profile with contact nos. present and expected salary details and joining time required to apply@kbsconsultants.com

Maintenance Engineer

Our client are a leading project engineering company engaged in the Design, Supply on Turnkey basis, custom designed process plants and equipments. The company synonymous with excellence and professionalism for 22 years has over 600 installations worldwide from concept to commissioning from raw material handling to waste treatment, from single process units to complete integrated turnkey plants.

Post: - Maintenance Engineer
Location: - Pune

They are looking in the candidate:

Design Engineer - Chennai
Our client, a Chennai based automation company has following requirement for post of Design Engineer

Degree :

Civil/Structural Designer (PDMS) - Oman
Reports To Civil/Structural Lead Engineer

Position description – Purpose
Developing Civil/Structural design drawings and documents and provide expertise in drawing systems.
Position description – (Roles &) Accountabilities
Works closely with discipline project engineers/designers and other discipline engineers in the delivery of
project engineering/construction deliverables, quality control drawings and overall project support.
Develop designs in PDMS and (new) drawings in electronic format (AutoCad).
Implement hand marked-up changes to drawings.
Maintain standard drawing templates.
Provides quality assurance reviews and detailed checking support.
Maintain and monitor drawing development progress.
Meet project commitments and deliver to schedule.
Identify & implement process improvement to reduce cycle time & cost.

Experience and Qualifications required
Minimum 10 years experience in the oil and gas industry with experience on major capital projects Minimum of 5 years experience with 3D
drawing systems (e.g. PDMS).

Key Competencies required
Technical knowledge of advanced 3D design applications and processes.
Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)
Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines.
Knowledgeable with designing industry related piping deliverables (skids, equipment general
arrangements, isometrics, vessel sketches, pipe supports, etc)
Is proficient in the use of human factors engineering guidelines and HSE best practices
Ability to work effectively in a team environment or independently with little guidance or supervision is required.
Knowledgeable of the interface points between design disciplines.
Is able to use Microsoft Word, Excel, Access, and PowerPoint.
Strong interpersonal and communications skills are highly desirable.

Please email your resume to apply@kbsconsultants.com Back
Senior Plant Layout / Piping Designer- Oman
Reports To Lead Mechanical Engineer – on design projects
Design Supervisor - on functional matters

Position description – Purpose
Development of layout studies, design drawings and documents for Greenfield and Brownfield sites for major FEED Projects.
Able to provide training and guidance to team members

Qualifications: A relevant Engineering Diploma or Degree

Experience
Minimum 12 years experience in the oil and gas industry with FEED experience on major capital projects and development of layout from a blank
canvas
Minimum of 5 years experience with 3D drawing systems (e.g. PDMS) although an excellent demonstrable plant layout pedigree may override
this with subsequent intensive PDMS training provided

Technical Abilities
Has a strong background in FEED, detailed design and EPC projects and deliverables, as well as piping, structural, electrical, instrumentation
and P&ID knowledge.
Strong interpersonal and communications skills are highly desirable c/w a good command of the English language.
Please email your resume to apply@kbsconsultants.com Back

Senior Quality Assurance Engineer - Oman
Reports To - Project Services Lead

Quality Assurance Engineer – Provide support and assistance to all disciplines with respect to the ensuring they implement their quality responsibilities throughout the execution of their work.

Position description – (Roles &) Accountabilities
Quality engineer in one or more integrated in-house Shell/contractor teams handling multiple project responsibilities
Preparation of Project Quality Assurance plans and Technical Integrity Plans
Development of quality assurance audit schedules and project specific procedures

Experience and Qualifications required
8 - 10 year experience in the oil and gas industry
Engineering degree or equivalent
Experience with ISO 9001 implementation
Piping Designer (PDMS) - Oman
Reports To Mechanical Lead
Position description – Purpose
Developing Mechanical design drawings and documents and provide expertise in drawing systems.
Position description – (Roles &) Accountabilities
Works closely with discipline project engineers/designers and other discipline engineers in the delivery of project engineering/construction deliverables, quality control drawings and overall project support.
Develop designs in PDMS and (new) drawings in electronic format (AutoCad).
Implement hand marked-up changes to drawings.
Maintain standard drawing templates.
Provides quality assurance reviews and detailed checking support.
Maintain and monitor drawing development progress.
Meet project commitments and deliver to schedule.
Identify & implement process improvement to reduce cycle time & cost.

Experience and Qualifications required
Minimum 10 years experience in the oil and gas industry with experience on major capital projects Minimum of 5 years experience with 3D drawing systems (e.g. PDMS).
Key Competencies required
Technical knowledge of advanced 3D design applications and processes.
Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)
Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines.
Knowledgeable with designing industry related piping deliverables (skids, equipment general
arrangements, isometrics, vessel sketches, pipe supports, Weight & CG’s, etc)
Is proficient in the use of human factors engineering guidelines and HSE best practices
Ability to work effectively in a team environment or independently with little guidance or supervision is
required.
Knowledgeable of the interface points between design disciplines.
Is able to use Microsoft Word, Excel, Access, and PowerPoint.
Strong interpersonal and communications skills are highly desirable.
Please email your resume to apply@kbsconsultants.com Back

Position description Purpose
Developing Electrical design drawings and documents and provide expertise in drawing systems.

Position description (Roles &) Accountabilities
Works closely with discipline project engineers/designers and other discipline engineers in the delivery of
project engineering/construction deliverables, quality control drawings and overall project support.
Develop designs in PDMS and (new) drawings in electronic format (Autocad).
Implement hand marked-up changes to drawings.
Maintain standard drawing templates.
Provides quality assurance reviews and detailed checking support.
Maintain and monitor drawing development progress.
Meet project commitments and deliver to schedule.
Identify & implement process improvement to reduce cycle time & cost.

Experience and Qualifications required
Minimum 10 years experience in the oil and gas industry with experience on major capital projects Minimum of 5 years experience with 3D drawing systems (e.g. PDMS) and AutoCAD.
Please email your resume to apply@kbsconsultants.com Back

SENIOR PROJECT ENGINEER - Oman
Our international client, a leading provider of professional services to the energy, resources and complex processes industries has the following requirement of their OMAN Office.

Role: To manage and engineer multi-discipline projects from front end, detail design , construction, commissioning, hand-over and close-out, within schedule and cost to an accep quality.
He/she shall report directly to the Project Manager.

Qualification Degree in a relevant engineering discipline (B.Sc./M.Sc./B.Eng.) and membership of internationally accepted applicable professional Institute.

Experience minimum of 12 years experience in design, specification, construction and general project engineering of oil and gas facilities, with a sound knowledge (min. 5 years experience) of project cost control / planning, systems.

General
Senior Project Engineer - shall have worked as a single-point responsible project engineer for several medium sized oil/gas projects (>50 MM$) or managing multiple smaller projects concurrently. Shall have proven capabilities in managing and motivating all disciplines to deliver projects.
Shall demonstrate sound commercial appreciation and judgment.
Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.
Must be PC literate.

Specific : Hands on experience on planning software tools such as PRIMAVERA or equivalent.

Please email your resume to apply@kbsconsultants.com Back

PROJECT ENGINEER - Oman

Our international client, a leading provider of professional services to the energy, resources and complex processes industries has the following requirement of their OMAN Office.

Role : To manage and engineer multi-discipline projects from front end, detail design , construction, commissioning, hand-over and close-out, within schedule and cost to an accep quality.
He/she shall report directly to the Project Manager.
Qualification Degree in a relevant engineering discipline (B.Sc./M.Sc./B.Eng.) and membership of internationally accepted applicable professional Institute.

Experience : minimum of 8 years experience in design, specification, construction and general project engineering of oil and gas facilities, with a sound knowledge (min. 3 years experience) of project cost control / planning, systems.

Please email your resume to apply@kbsconsultants.com Back

SENIOR DESIGNOR-OMAN

Our international client, a leading provider of professional services to the energy, resources and complex processes industries has the following requirement of their OMAN Office.

Role :To provide projects with mechanical / piping / pipe line / electrical / control & automation or civil engineering drawings.
He/she shall report to relevant discipline head.

Qualification - minimum HND or Diploma in Engineering.

Experience : shall have a minimum of 12 years related experience plus proven capability in an engineering design firm. Minimum of 5 years experience in design of oil & gas facilities with extensive experience in front end and detailed design, plus proven experience in AutoCAD

Company or Shell Group experience is preferred.

General
Some level of field experience in construction & commissioning will be preferred.
Particular Good spoken and written English and PC literate.
shall have good skills in management of a pool of Designers / drafts persons and also task planning to meet schedules. Hence must have good interpersonal and communication skills.
shall have abilities to effectively check the drawings prepared by Designers in the same discipline.

Please email your resume to apply@kbsconsultants.com Back

DESIGNER / JUNIOR DESIGNER– Oman
Our international client, a leading provider of professional services to the energy, resources and complex processes industries has the following requirement of their OMAN Office.

Role: To provide projects with mechanical / piping / pipe line / electrical / control & automation or civil engineering drawings.
He/she shall report to relevant discipline head.

Qualification: Designer / Junior – minimum HND/HNC or certificate from recognised training institute in engineering.
Lower level qualifications may be considered only in exceptional cases of having a good level of experience to compensate.

Experience

Designer - shall have a minimum of 8 years related experience plus proven capability in an engineering design firm. Minimum of 3 years experience in design of oil & gas facilities with experience in front end and detailed design plus experience in AutoCAD

Junior Designer - shall have a minimum of 2 years related experience in oil & gas facilities plus proven capability in an engineering design firm

Company or Shell Group experience is preferred.

General Some level of field experience in construction & commissioning will be preferred.

Particular : Good spoken and written English and PC literate.

Lead Structural Engineers - Nigeria.

Our clients, a reputed Oil & Gas Design Engineering company in Nigeria requires

Lead Structural Engineers with 10 to 20 years of experience in Structural Design Engineering with experience in offshore oil & gas.
The position is to be based at Lagos after a month's stay at our client's office in Houston, USA.
They provide design engineering and project management services to Exxonmobil, Shell, Agip Oil company etc.

Minimum Education and experience:

Bachelors degree in Civil/Structural engineering
10-20 years experience in upstream oil & gas projects
Structural design & engineering calculations
Expert on hand knowledge of sacs software

Salary details
Maximum USD 5000 p.m. + car (shared) +driver(shared) +fuel+fully furnished accommodation with utilities paid+air tickets every four months to
India+3weeks holidays every 4 months+medical.
*Please email your resume to apply@kbsconsultants.com Back

?ROTATING EQUIPMENT ENGINEER - Chennai
Our clients are a reputed consulting company for projects in OIL & GAS, Petrochemicals, Refineries, Chemicals, and Maritime Works. They are located at Chennai (Madras), India and have been working for process industries since 1983. Their activities include

* Project Management
* Engineering
* Procurement
* Site Supervision
* Commissioning
* Maintenance

They are looking for Rotating Equipment Engineer for Chennai offshore / Project Locations experienced in OIL & GAS, Petrochemicals, Refineries, Chemicals, Power and Maritime Works

Position: Senior rotating equipment engineer.

Educational Qualifications: Graduate Mechanical Engineers with about 8 - 20 years of experience in Oil and Gas sectors, Refineries and petrochemical units.

Areas of Experience:
The candidate shall have knowledge in selection of Gas Turbines, Generators, Compressors and Pumps; should be conversant with API and other international codes, standards and specifications; should be able to prepare dta sheets and RFQ documents, discuss with vendors, do technical analysis and review all vendor documents. Engineers from EPIC contractors / Consultants preferred.

Please email your resume to apply@kbsconsultants.com Back

?STATIC EQUIPMENT ENGINEER - Chennai
Our clients are a reputed consulting company for projects in OIL & GAS, Petrochemicals, Refineries, Chemicals, and Maritime Works. They are located at Chennai (Madras), India and have been working for process industries since 1983. Their activities include

* Project Management
* Engineering
* Procurement
* Site Supervision
* Commissioning
* Maintenance

They are looking for Static Equipment Engineer for Chennai offshore / Project Locations experienced in OIL & GAS, Petrochemicals, Refineries, Chemicals, Power and Maritime Works

Position: Senior Static equipment engineer.

Educational Qualifications: Graduate Mechanical Engineers with about 8 - 20 years of experience in Oil and Gas sectors, Refineries and petrochemical units.

Areas of Experience:
The candidate shall have knowledge in core design of static equipment like pressure vessels, heat exchangers, columns, storage tanks etc. Thermal design of heat exchangers, fired heaters with HTRI program and weld fatigue analysis of pressure vessels will be an added advantage. Should be conversant with ASME, PD5500 and other international codes, standards and specifications; should be able to prepare specifications, data sheets and RFQ documents, discuss with vendors, do technical analysis and review all vendor documents. Engineers from EPIC contractors / Consultants preferred.

?PACKAGES ENGINEER - Chennai
Our clients are a reputed consulting company for projects in OIL & GAS, Petrochemicals, Refineries, Chemicals, and Maritime Works. They are located at Chennai (Madras), India and have been working for process industries since 1983. Their activities include

* Project Management
* Engineering
* Procurement
* Site Supervision
* Commissioning
* Maintenance

They are looking for Package Engineer for Chennai offshore / Project Locations experienced in OIL & GAS, Petrochemicals, Refineries, Chemicals, Power and Maritime Works

Position: Senior packages engineer

Educational Qualifications: Graduate Mechanical Engineers with about 8 - 20 years of experience in Oil and Gas sectors, Refineries and petrochemical units.

Areas of Experience:

The candidate shall have knowledge in defining and selection of packages like Glycol Dehydration system, Produced Water Treatment unit, Fired Heaters etcetera and Material Handling systems like Pedestal Cranes etcetera; should be conversant with ASME, API and other international codes, standards and specifications; should be able to prepare data sheets and RFQ documents, discuss with vendors, do technical analysis and review all vendor documents; should posses multidisciplinary concept. Experience in design of mechanical static equipment will be an added advantage. Engineers from EPIC contractors / Consultants preferred.

?Piping Flexibility Engineer - Chennai
Our clients are a reputed consulting company for projects in OIL & GAS, Petrochemicals, Refineries, Chemicals, and Maritime Works. They are located at Chennai (Madras), India and have been working for process industries since 1983. Their activities include

* Project Management
* Engineering
* Procurement
* Site Supervision
* Commissioning
* Maintenance

They are looking for Piping Flexibility Engineer for Chennai offshore / Project Locations experienced in OIL & GAS, Petrochemicals, Refineries, Chemicals, Power and Maritime Works

Qualification: Minimum 5 to 6 years minimum in oil and gas industry and 3 years experience as Stress Engineer.
Activities involved: -Must have the ability to perform piping stress analysis. Must be autonomous
-Issue project piping flexibility specification and critical line list
-Review technical documentation and requirements
-interface with other disciplines: layout, process, material, equipment..
The good profile should be a candidate with a BE in Mechanical Engineering who started his career in layout and who is working actually as a stress engineer (for 3 years).

Please mail your resume to kbs@kbsconsulants.com Back

?Position : Sr.Engineer / Dy.Manager / Manager - Chennai

Our clients, a multi location engineering group with proven track record in undertaking high value turnkey engineering contracts in power and process sector industries, based at Chennai are looking for the following

Position : Sr.Engineer / Dy.Manager / Manager

Experience : Minimum 3 to 8 years in power projects
(More preference will be given to experience in Erection & Commissioning at Site)
Qualification : BE / DME - Mechanical
Skills : Project Planning / MS Project / Primavera.
Location : Chennai - Head Office

Our Client, a leading civil contracting company in dubai requires Quantity Surveyors/Estimators to work in their Estimating & Tendering Dept.

The persons they are looking for should be:-

- Preferred Age : 30-35 years
- Degree (B.E. (Civil) or equivalent) holder with 5-7 years experience as a Quantity Surveyor/Estimator in a Building Contracting Company.
- Good in quantity take-off from drawings.
- Sending of enquiries to sub-contractors for obtaining quotations and analysing the same.
- Knowledge of pricing and compiling of Tenders is desirable but not a must.
- Gulf Experience in similar position will be an advantage.
- Should be computer literate.
- Salary range: Dhs.7,000/- to Dhs.8,000/- (all inclusive) plus once a year air ticket for self & family + other gratuity, etc... as per UAE Labor Law.

?Process Engineers - Chennai

Our clients are a reputed consulting company for projects in OIL & GAS, Petrochemicals, Refineries, Chemicals, and Maritime Works. They are located at Chennai (Madras), India and have been working for process industries since 1983. Their activities include

* Project Management
* Engineering
* Procurement
* Site Supervision
* Commissioning
* Maintenance

They are looking for Process Engineers for Chennai offshore / Project Locations

Basic Qualification: Chemical engineering Degree from a reputed University/ Institution.

Previous Experience: 8-15 yrs in any Engineering Design Consultancy (or) Technical services division of Oil & Gas, LNG , Refinery and Petrochemical Industries

Areas of exposure in the following activities of Process Engineering

Knowledge in Process Simulation Softwares viz: Hysys, Aspen, Flarenet etc
Knowledge in concept studies & Basic , FEED & Detail engineering for Process plants
Generation of PFDs with HMB and P&IDs
Process Calculations for sizing of various equipment viz: Pumps, Compressors, Separators etc
Knowledge in Thermal design of Heat Transfer equipment
Knowledge in developing Process Data Sheets for various process equipment
Functional specification for various utility packages
Hydraulic calculations for single phase & multi phase fluids
Knowledge in performing adequacy Check for process equipment
Establishing the Relief load for equipment Protection devices
Utility Balance & sizing calculations of various auxiliary services
Tank farm sizing calculations
Familiarization of Design Codes viz: API, NFPA etc and reputed International design engineering practices
Knowledge in Safe Charts and Cause & Effect Diagrams
Preparation of Operating Procedures for Process Plant facilities
Knowledge in HAZOP studies & etc

One of our client, a leading glass manufacturing company have the following requirement for the Post of Purchase Engineer

Qualification:

B.E Mechanical Engineering with 5-7 yrs experience Or D.M.E with 6-7 yrs experience
Location: Chennai
Candidates residing within TamilNadu are preferable

Our client, a new start up company who are into automotive engine design have the following requirement

?Project Manager - Mumbai

(5-9 years experience)
Automotive/Mechanical Engineers to work on IC engine design and related work. Helpful experience will include work in IC engine design, cooling system/heat transfer, steam engine design (model steam engines is accep), and Carnot Cycle theory of water and other fluids. Fluency in English and experience with CAD and related software is preferred.

(2-5 years experience)
Automotive/Mechanical Engineers to work on IC engine design and related work. Helpful experience will include work in IC engine design, cooling system/heat transfer, steam engine design (model steam engines is accep), and Carnot Cycle theory of water and other fluids. Fluency in English and experience with CAD and related software is preferred.

Age, Salary and gender is not Constraint

?Our Clients based in UK specialise in Structural Engineering. They have an immediate requirements for their Chennai office for Candidates with solid experience in :

Steel Detailers : Diploma/ITI/B.E.: Civil/Mechanical with knowledge in strucad & xsteel packages with 3+ years of experience. Location Chennai
Please email your resume to apply@kbsconsultants.com Back

Our Clients based in UK specialise in Structural Engineering. They have an immediate requirements for their Chennai office for Candidates with solid experience in :

Checkers: : Diploma / ITI / B.E.: Civil/Mechanical with knowledge in structural steel with 5+ years of experience. Knowledge in strucad & xsteel packages is an advantage. Location Chennai

?Our Clients based in UK specialise in Structural Engineering. They have an immediate requirements for their Chennai office for Candidates with solid experience in :

Design Engineers - : BE Civil/Mechanical. with knowledge in design analysis and calculations. Location Chennai

One of our client a leading Architects and Engineering Consultants are looking for Project Manager for their Projects at various locations .

(Projects - Chemical Industries, Textile Industries, Engineering Industries, Cement Plants, Sugar Factories, Surveying and Planning Canal Distribution network)

Position :Project Manager

Qualification :

?Structural Engineer
One of our client a leading Architects and Engineering Consultants are looking for Structural Steel Engineers for their Projects at various locations .

(Projects - Chemical Industries, Textile Industries, Engineering Industries, Cement Plants, Sugar Factories, Surveying and Planning Canal Distribution network)

Qualification :B.E./M.E. (Civil/Structural) Engineering with 6-8 years of experience in industrial Projects.

One of our client a leading Architects and Engineering Consultants are looking for Piping Engineers for their Projects at various locations .

(Projects - Chemical Industries, Textile Industries, Engineering Industries, Cement Plants, Sugar Factories, Surveying and Planning Canal Distribution network)

Qualification

Engineering graduates with 6 - 8 years experience in Piping in Chemical, Oil, Gas & Petrochemical Industries.

LEAD PIPING MANAGER/ENGINEER-Powai, Mumbai

?Procurement Manager

Our client, one of the largest Steel Fabrication companies in Indonesia for heat exchangers, pressure vessels and other steel structures serving the oil & gas, power, petrochemical and hydrocarbon refining industries are looking for a Procurement Manager who will report to company Managing Director.
Supervisory responsibilities include supervision of procurement.

Essential Duties & Responsibilities:

Develop and implement procurement strategy for the business, quality assurance and problem resolution.
Develops and directs procedures and methods to ensure adequate internal controls, maintain supplier relationships and maintain the integrity of the entire procurement cycle including meeting & maintaining quality standards.
Most work performed in, but not limited to, an office setting.
Protective equipment only necessary when visiting the shops or job sites.
Engineering Manager
Our client, one of the largest Steel Fabrication companies in heat exchangers, pressure vessels and other steel structures serving the oil & gas, power, petrochemical and hydrocarbon refining industries are looking for an Engineering Manager - report company Managing Director.

Essential Duties & Responsibilities:
Strategic planning, product design, quality assurance, problem resolution.
Develops and directs procedures and methods to ensure quality standards are met and maintained.
Provides engineering expertise in the areas of tooling, prints, specifications, product maintenance, raw materials and vended products throughout the organization.
Ensures current and accurate costing (including specials) in conjunction with finance.Employee training and development.
Strong customer orientation.
Excellent interpersonal and communication skills.
High performance teams and a strong team player.
Work Environment:
Most work performed in, but not limited to, an office setting.
Protective equipment only necessary when visiting the shops or job sites.

Salary structure
1. Basic Salary range :
Back

PLC Programmer - Chennai

Our client, an ISO 9000:2000 certified company and the Engineering Solution Partners of Rockwell Automation have the following requirement

PositionPLC Programmer

Qualification : Degree / Diploma in Electronics
Experience   : 2-3 experience in Siemens PLC programming
Location        : Kotivakkam, Chennai

Please email your resume to apply@kbsconsultants.com with current and expected salary details.

?Electrical Design Engineer - Bangalore

Our clients are a reliable multi disciplinary Engineering and Geospatial services firm based in Bangalore, India with the offices in the US and Middle East. They have been a backend, Scalable Design and Detailing partner for Architects, Engineering Consulting and Contracting and Map Publishing companies in US since 1995 and in Middle East since 2006 with the total staff of 100+ Architects, Engineers and Draftsmen .

They have immediate requirement for the following skills:

Experience: 5 to 15+ years
Qualification: B.E/B.Tech in Electrical
Software knowledge: Power load balancing, lighting lux calculation, AutoCAD.

Job Description:

a. Design of power, lighting, low current/electrical systems, lightning protection, fire alarm and system design.
b. Preparation of detailed drawings using the design inputs.
c. Preparation of bill of quantities for complete project.
d. He must have good work exposure to electrical codes and standards particularly KHARAMAA.
e. Good work exposure to Middle East, UK and US projects is required.
f.   Ability to lead a team of design engineers & draftsmen.
g. He must be a team player with problem solving skills.

Please email your resume to apply@kbsconsultants.com Back

?Senior Checker-X-steel - Bangalore

Our clients are a reliable multi disciplinary Engineering and Geospatial services firm based in Bangalore, India with the offices in the US and Middle East. They have been a backend, Scalable Design and Detailing partner for Architects, Engineering Consulting and Contracting and Map Publishing companies in US since 1995 and in Middle East since 2006 with the total staff of 100+ Architects, Engineers and Draftsmen .

They have immediate requirement for the following skills:

Experience: 7+ years of Xsteel detailing/Checking experience.
Qualification: B.E./Diploma/ITI Civil or B.E./Diploma/ITI Mechanical.

Job Description:
Good work exposure to Steel detailing using Xsteel software.
Ability to lead and guide his team members.
Exposure to UK & Middle East projects.

Please email your resume to apply@kbsconsultants.com Back

?Plumbing Design Engineer/Public Health Engineer (PHE)

Our clients are a reliable multi disciplinary Engineering and Geospatial services firm based in Bangalore, India with the offices in the US and Middle East. They have been a backend, Scalable Design and Detailing partner for Architects, Engineering Consulting and Contracting and Map Publishing companies in US since 1995 and in Middle East since 2006 with the total staff of 100+ Architects, Engineers and Draftsmen .

They have immediate requirement for the following skills:

Position: Plumbing Design Engineer/Public Health Engineer (PHE)

Experience: 5 to 15 years
Qualification: B.E/BTech in Mechanical Engineering
Software Knowledge: AutoCAD, HEVACOMP.

Job Description:

The desired candidate must have good work exposure to plumbing interiors/Building services.
Design of rain water design, pipe sizing, external pipe sizing & internal pipe sizing.
Design of drainage & sewerage systems (Above & Below ground drainage)
Design of fire protection systems like sprinkler, fire hydrant & fire extinguisher etc.
The desired candidate must have good work exposure to Middle East, UK and US projects.
He/She must be a team player
*Please email your resume to apply@kbsconsultants.com Back

?Senior Draftsman / Draftsman / Junior Draftsman – RCC, Steel, Mechanical (HVAC, Plumbing, Firefighting),
Electrical, Architectural Draftsmen   - Bangalore

Our clients are a reliable multi disciplinary Engineering and Geospatial services firm based in Bangalore, India with the offices in the US and Middle East. They have been a backend, Scalable Design and Detailing partner for Architects, Engineering Consulting and Contracting and Map Publishing companies in US since 1995 and in Middle East since 2006 with the total staff of 100+ Architects, Engineers and Draftsmen .

They have immediate requirement for the following skills:

Experience: 2 to 10 years out of which at least 30 to 50% on projects from ME, EU, US projects
Qualification: Graduate Engineers/Diploma Holders/ITI
Additional: Lead teams, meeting delivery and quality commitments

Please email your resume to apply@kbsconsultants.com Back

?Senior - Buyer - Chennai

One of our reputed clients in the Pharmaceutical industry have immediate requirements for the following skills at Chennai.

Desired Profile: Graduate (compulsory) / MBA

Other/Special Requirements:
a) Needs to read & write Tamil
b) Young , capable, dynamic & ready to travel across TamilNadu
c) Should have good Vendor relationships
d) Should have good buying Experience
e) Males preferred

Minimum Experience: 5 -6 years (in an outdoor industry preferred)

Location: Chennai

*Please email your resume to apply@kbsconsultants.com Back
Welding Engineers - Chennai
Our clients, a multi location engineering group with proven track record in undertaking high value turnkey engineering contracts in power and process sector industries, based at Chennai are looking for the following

Qualification and Experience
B.E. or DME with 1 or 2 years of minimum experience.
Candidate should have floor experience of welding.
Please email your resume to apply@kbsconsultants.com Back

?Marine HVAC Engineers / Project Managers - Singapore

Our clients at Singapore, who are into design, installation & maintenance of air- conditioning and refrigeration units in the marine & offshore industry have immediate openings for the following skills:

To facilitate and execute MARINE HVAC design & drawings to meet Company and customer requirements, error free and to the requirements of associated standards and Company procedures, ensuring the timely issue of drawings and documentation.

Main Duties & Responsibilities:
Prepare HVAC system design, heatload calculation and estimation of deliverables in a project.
Prepare details of technical offers (HVAC package solutions).
Attend technical meetings with clients and be able to provide input and support throughout the client interaction.
Person Specification/Profile
Academic & Other Requirements:
Sound educational background required; Mechanical Engineering Degree or Diploma.
3-4 years experience in HVAC system design; exposure to Offshore Marine industry.
Knowledge of Autocad, detail engineering, drawings of HVAC system (D&ID, P&ID, equipment layout) is essential.
Familiar with classification and marine regulatory codes, marine plant processes, controls and automation, and piping and instrumentation, international standards applicable to marine engineering, etc

5 ½ Days Work Week (Mon to Fri) – 8.00am to 5.30pm
Please email your resume to apply@kbsconsultants.com Back?Position : Electrical Engineer Base Location: JAFZA
Our clients one of the leading oil and gas company in UAE have immediate requirements for the following

Essential Duties & Responsibilities:

Handle all electrical engineering works.
Responsible for the installation, testing, and commissioning of all electrical equipment.
Read and interpret electrical drawings and specifications.
Troubleshoot motor controls and switch gears.
Responsible for all electrical engineering works such as design and control system, PLC, electro-pneumatics, hydraulics, sensors, motion controllers, etc.
Handle calibration and repairs of PLC, Pneumatic relays and test measuring device.
Develop engineering drawings to support design ideas.
Reviews existing electrical designs and specifications being purchased or fabricated.
Ensures the new systems are compatible with existing systems and operate without causing an overload.

Education : Diploma in Electrical Engineering preferably licensed Bachelor’s degree in electrical engineering w/ digital electronics background.
Communication: Good written and verbal communication skills
Please email your resume to apply@kbsconsultants.com Back
? Position : Project Engineer Base Location : United Arab Emirates
Our clients one of the leading oil and gas company in UAE have immediate requirements for the following

Summary: Under the supervision of Project/Service Manager, Project Engineer will be responsible for the entire project cycle includes design, development and project execution / completion within the timeframe, cost, quality and safety parameters.

IT Skills: Computer literate with experience of MS-Office applications.
Health: Must be in good health and pass UAE Government fitness test.
Back

? Position: Engineer (Hydraulics) Base Location: United Arab Emirates
Our clients one of the leading oil and gas company in UAE have immediate requirements for the following
Summary: Engineer (Hydraulics) will be responsible for troubleshooting and commissioning of industrial, marine and mobile hydraulic related / supported applications.

In addition, shall also support the activities of our other units whenever requested.

Educations and Experience: Graduate caliber with 3 – 6 years exp in supervisory role (s).
Certificates: Engineering Degree/diploma or equivalent.

Communication: Advanced communication, presentation skills, able to control conversations and create high standard reports.
Health: Must be in good health and pass Government fitness test.

Back

? Project/Senior Project Engineer - Kuwait

Our clients, a Kuwait based company, are suppliers of industrial equipment to oil, petrochemicals and power sector. They have the following requirements.

Qualification: Bachelors degree in Mechanical/Electrical or Electronics
Minimum 5 years of experience for engineers and
10 years for senior Engineers in installation and commissioning in fire fighting and
Preference for those who have experience with NN100(Nitrogen) and Integlex stystem.

Location : Kuwait
Back

? Estimation and Senior Engineer - Kuwait

Our clients, a Kuwait based company, are suppliers of industrial equipment to oil, petrochemicals and power sector. They have the following requirements.

Qualification: BE in Mechanical/Electrical or Electronics Engineering.
Experience : Minimum 5 years of experience in Engineering and
10 years experience for senior engineers in fire fighting(gas)
and fire alarm. preference to those who have experience with
NN100(Nitrogen) and Integlex system.

Location : Kuwait
Please email your resume to apply@kbsconsultants.com Back

?Project Manager - Kuwait

Our client, one of the largest curtain walling companies in the Middle East,has deserved reputation throughout the region
for producing premium quality aluminium glazed curtain walling have the following requirement.

Location : Kuwait

Project Manager :Project Manager (B.E. Mechanical)- should have experience in
undertaking and supervising projects involved in the design and fabrication of aluminium and steel products.

Experience-10 years
Back

? Structural Engineer - Kuwait

Our client, one of the largest curtain walling companies in the Middle East, has deserved reputation throughout the region
for producing premium quality aluminium glazed curtain walling have the following requirement.

Location : Kuwait

Structural Engineering : B.E. Mechanical -The structural engineer should have experience in
aluminium and steel fabrication and instrumentation.

Experience - 5 years
Back

? Design Engineer - Kuwait

Our client, one of the largest curtain walling companies in the Middle East, has deserved reputation throughout the region
for producing premium quality aluminium glazed curtain walling have the following requirement.

Location : Kuwait

Design Engineer - B.E. Mechanical - The design engineering should have experience in cad programming,
design of aluminium, steel panels and structures.

Experience - Minimum 5 years
Back

?P Band (Deputy Manager – Manufacturing Assembly) - Mumbai

Job Description:

The positions are in the manufacturing Department of Process Equipment Division.
The incumbent will be responsible for the following roles and responsibilities:

1. Meeting the delivery commitments of the customers
2. Multi Skilling of the workmen.
3. Ensuring the required level of Discipline and Productivity.
4. Meeting the quality requirement of the customers and reducing the cost.
5. Continuously improving the processes.
6. Maintaining the shop floor discipline and safe work environment in the department.

QUALIFICATIONS: B.E / B.Tech/ Diploma in Mechanical / Production/Fabrication Technology
EXPERIENCE 5- 7 years of work exp
Preferred: Minimum 5 years experience in Fabrication of Heat Exchangers, Columns and Pressure Vessels.
Please email your resume to apply@kbsconsultants.com Back

?P Band Manufacturing Engineering - Production Engineering - Mumbai

Qualification: B.E / B.Tech/ Diploma in Mechanical / Production.
Experience: Minimum 5 Years in Production Engineering in Fabrication Industries dealing with Manufacturing of Heat Exchangers, Pressure Vessels,
Columns, Reactors etc.
Preferred Experience: Relevant experience in Fabrication / Welding required as per International Codes like ASME, A D Merkblatter, TEMA etc
Please email your resume to apply@kbsconsultants.com Back

?T Band Design - Mumbai

Job Description:

The position is in the Design Department . The incumbent will be responsible for:

1.Preparation and checking of Design calculations of Pressure Vessels, Heat Exchangers and other Process Equipments according to national and international codes
like ASME, TEMA, AD MERKBLATTER, PD 5500, etc.
2.Preparation of detailed bill of materials and technical specifications for bought out items.
3. Checking of fabrication drawings.
4. Preparation of Material Take - Offs.
5. Leading a team of engineers and draughts men.
6.Ensuring quality and timeliness for MTO's, drawings and after design documents.
7. Co – Ordination and correspondence with client, Third party Inspection Agency, PE etc. for approval of design documents.

Qualification: Graduate in Mechanical Engineering
Preferred: Post Graduate in Mechanical Engineering

Experience: 10+ Years in Fabrication Industries dealing with Design of Heat Exchangers, Pressure Vessels, Columns, Reactors.
Relevant experience in Design required as per International Codes like ASME, A D Merkblatter, TEMA, Pressure Equipment Directive Requirements, Chinese SQL Requirements,
*Please email your resume to apply@kbsconsultants.com Back

? T Band Manufacturing - Mumbai
The position is in the Manufacturing Department of Process Equipment Division.

The incumbent will be responsible for the following roles and responsibilities:
1. Formulate and implement manufacturing strategy, which is inline with the divisional business strategy.
2. To ensure the production as per plan and as per the requirement of various international codes like ASME, TEMA, A D MERKBLATTER, PRESSURE EQUIPMENT DIRECTIVE REQUIREMENTS, and CHINESE SQL REQUIREMENTS etc.
3. To ensure productivity of each workmen & machine as per the set standard/ norm.
4. To ensure discipline is maintained in shop as per company rule.
5. To ensure all manufacturing expenses remain lower than the budget.
6. To ensure safe practices are followed.
7. Adopting new ways and means that translates in getting higher productivity, better quality products at lower cost.
8. Maintaining good working environment, safe practices and good housekeeping.

Qualifications :Degree or Diploma in Mechanical / Production.

Experience: 10 to 15 Years in Fabrication Industries dealing with Manufacturing of Heat Exchangers, Pressure Vessels, Columns, Reactors.
Preferred Relevant experience in Fabrication / Welding required as per International Codes like ASME, A D Merkblatter, TEMA, Pressure Equipment Directive Requirements, Chinese SQL Requirements, experience of Manufacturing secondary reformers, PP reactors etc. Consistent track record of high on time delivery performance.
Please email your resume to apply@kbsconsultants.com Back

Project Manager - Mumbai / Noida

Our clients are the world leader in providing electronic security systems, fire protection, detection and suppression systems, sprinklers and fire extinguishers.
With more than 10,000 employees, their products and services are used to safeguard firefighters, prevent fires, deter thieves and protect people and property.
They have immediate openings for Project Managers at Mumbai and Noida.

Project Manager - Mumbai / Noida

Educational Qualifications and Experience
B.E. in Mechanical/Chemical
Knowledge of Electrical/Electronic systems will be an added advantage.
11-15 yrs in project management out of which 3 to yrs experience in project execution of Mechanical systems (HYDRANT, SPRINKLER, FOAM / SPRAY).
Experience in handling large value (INR 300 Mn) projects independently in an EPC model company

Careers for Electronics and Communication Engineers Computer Science Engineers Employment Opportunities Mechanical Chemical engineering , civil engineering , structural engineers, architects jobs

Choose your location & Just a Call to find the right job

Career opportunities and job positions with reputed MNCs and Large corporates for Engineers

engineering Draughtsman Job Opportunities Electronics and Communication engineering Mechanical Engineering oil and gas piping pipeline structural refineries design engineer biotechnology and nanotechnology mineral processing, .

Please Read This
Resume Registration Tips | Faq

Email your resume

Buy a Business ! Sell a Business !

Accounting Services Outsourcing

Statutory Compliance Services
GST, TDS, IncomeTax returns filing

Follow US on your fav social network

LEAD PIPING MANAGER/ENGINEER-Powai, Mumbai

Careers for Electronics and Communication Engineers Computer Science Engineers Employment Opportunities Mechanical Chemical engineering , civil engineering , structural engineers, architects jobs

Choose your location & Just a Call to find the right job

Career opportunities and job positions with reputed MNCs and Large corporates for Engineers

engineering Draughtsman Job Opportunities Electronics and Communication engineering Mechanical Engineering oil and gas piping pipeline structural refineries design engineer biotechnology and nanotechnology mineral processing, .

Please Read This Resume Registration Tips | Faq

Email your resume

Buy a Business ! Sell a Business !

Accounting Services Outsourcing

Statutory Compliance Services GST, TDS, IncomeTax returns filing

Follow US on your fav social network

LEAD PIPING MANAGER/ENGINEER-Powai, Mumbai

Please Read This
Resume Registration Tips | Faq

Statutory Compliance Services
GST, TDS, IncomeTax returns filing